Herramientas de corte para optimizar parámetros de clasificación de especies maderables con redes neuronales convolucionales / Cutting tools to optimize classification parameters of timber species with convolutional neural networks

Introducción: La gran diversidad de especies maderables tropicales demanda el desarrollo de nuevas tecnologías de identificación con base en sus patrones o características anatómicas. La aplicación de redes neuronales convolucionales (CNN) para el reconocimiento de especies maderables tropicales se ha incrementado en los últimos años por sus resultados prometedores. Objetivo: Evaluamos la calidad de las imágenes macroscópicas con tres herramientas de corte para mejorar la visualización y distinción de las características anatómicas en el entrenamiento del modelo CNN. Métodos: Recolectamos las muestras entre el 2020 y 2021 en áreas de explotación forestal y aserraderos de Selva Central, Perú. Luego, las dimensionamos y, previo a la identificación botánica y anatómica, las cortamos en secciones transversales. Generamos una base de datos de imágenes macroscópicas de la sección transversal de la madera, a través del corte, con tres herramientas para ver su rendimiento en el laboratorio, campo y puesto de control. Resultados: Usamos tres herramientas de corte para obtener una alta calidad de imágenes transversales de la madera; obtuvimos 3 750 imágenes macroscópicas con un microscopio portátil que corresponden a 25 especies maderables. El cuchillo ''Tramontina'' es duradero, pero pierde el filo con facilidad y se necesita una herramienta para afilar, el cúter retráctil ''Pretul'' es adecuado para madera suave y dura en muestras pequeñas de laboratorio; el cuchillo ''Ubermann'' es apropiado para el campo, laboratorio y puesto de control, porque tiene una envoltura duradera y láminas intercambiables en caso de pérdida de filo. Conclusiones: La calidad de las imágenes es decisiva en la clasificación de especies maderables, porque permite una mejor visualización y distinción de las características anatómicas en el entrenamiento con los modelos de red neuronal convolucional EfficientNet B0 y Custom Vision, lo cual se evidenció en las métricas de precisión.

Introduction: The great diversity of tropical timber species demands the development of new technologies capable of identifying them based on their patterns or anatomical characteristics. The application of convolutional neural networks (CNN) for the recognition of tropical timber species has increased in recent years due to the promising results of CNNs. Objective: To evaluate the quality of macroscopic images with three cutting tools to improve the visualization and distinction of anatomical features in the CNN model training. Methods: Samples were collected from 2020 to 2021 in areas of logging and sawmills in the Central Jungle, Peru. They were later sized and, after botanical and anatomical identification, cut in cross sections. A database of macroscopic images of the cross-section of wood was generated through cutting with three different tools and observing its performance in the laboratory, field, and checkpoint. Results: Using three cutting tools, we obtained high quality images of the cross section of wood; 3 750 macroscopic images were obtained with a portable microscope and correspond to 25 timber species. We found the ''Tramontina'' knife to be durable, however, it loses its edge easily and requires a sharpening tool, the ''Pretul'' retractable cutter is suitable for cutting soft and hard wood in small laboratory samples and finally the ''Ubermann'' knife is suitable for use in the field, laboratory, and checkpoint, because it has a durable sheath and interchangeable blades in case of dullness. Conclusion: The quality of the images is decisive in the classification of timber species, because it allows a better visualization and distinction of the anatomical characteristics in training with the EfficientNet B0 and Custom Vision convolutional neural network models, which was evidenced in the precision metrics.

The Response of Local White Guinea Yam Cultivars to the Vine Cutting Propagation Technique Using Locally Available Rooting Substrates

Good quality planting materials for yam cultivation is a major challenge and adapting the most preferred local varieties to high ratio propagation methods such as the vine cutting could help ameliorate this constraint. An experiment was conducted in the screen house at CSIR-Savanna Agricultural Research Institute to assess the response of ‘Labako’, ‘Nyamenti’ and ‘Kpamyo’ (check) to vine cutting under different substrates. The experiment was 3 x 6 factorial arranged in a completely randomized design with 3 replications. Single node cuttings were obtained from 3 months old plants and established in the various rooting substrates (carbonized rice husk; fermented rice bran; aged rice husk; top-soil ,cocopeat and carbonized rice husk + top-soil; 2:1).Highly significant differences (P<0.001) existed in main effects and interaction of the factors. All cultivars attained 100% survival in CRH (carbonized rice husk) and cocopeat. Kpamyo and Nyamenti had 89.6% regeneration in cocopeat, FRB (fermented rice bran) and CRH. Labako exhibited the maximum shoot growth (31 cm) in CRH whiles the minimum (10 cm) was observed in ARH (aged rice husk) for Kpamyo. Six nodes were produced by Nyamenti in CRH, whiles Kpamyo produced 3 nodes in the same substrate. Labako initiated 88% tuberization, higher than Kpamyo with 75%. Generally, the cultivars were successfully adapted to the vine cutting technique in CRH, FRB as well as cocopeat. CRH and FRB are locally available, hence less expensive to acquire and therefore recommended for cost-effective single node propagation of the popular local yam cultivars.

Biosseguridade na avicultura de corte: impactos na produção e alternativas para prevenção de doenças / Biosecurity in beef poultry: impacts on production and alternatives for disease prevention / Bioseguridad en avicultura: impactos en la producción y alternativas para la prevención de enfermedades

A avicultura de corte levou ao Brasil a ser o no líder exportador de carne de frango, desde 2011, e o terceiro produtor global desta proteína. Portanto, é importante que todo produtor possua e mantenha um programa de biosseguridade continuado, respeitando rigorosamente cada etapa ou prática de manejo a fim de obter o sucesso econômico de sua produção. Sustentado pela medicina veterinária preventiva, um programa de biosseguridade deve apresentar aspectos direcionados a cada sistema de proteção em particular, para prevenir e controlar a presença e/ou introdução de microrganismos patogênicos nos rebanhos. O objetivo deste trabalho e apresentar uma revisão atualizada de literatura sobre programas de biosseguridade para evitar a proliferação de agentes patogênicos na avicultura de corte como os dois tipos de Salmonella que causam riscos à saúde pública e à dos animais. A pesquisa é qualitativa de cunho exploratório bibliográfico-documental, com pesquisa em sites como o Google Acadêmico, da revista de veterinária da Unipar, SCIELO, portal CAPES e sites governamentais. O resultado da pesquisa apresentou um panorama real sobre emprego de programas de biosseguridade no Brasil, direcionados à avicultura de corte, demonstrando que os produtores estão se conscientizando sobre a importância destes programas, devido à pressão do mercado exportador global. Conclui-se que ainda falta uma maior conscientização por parte de todos os produtores brasileiros, para evitar que o plantel produzido seja contaminado por agentes patogênicos, principalmente a Salmonella, evitando que a saúde pública e animal esteja comprometida. Somente desta maneira, o Brasil conseguirá manter e expandir mais o mercado avícola a nível global.(AU)

Poultry farming has led Brazil to be the leading exporter of chicken meat, since 2011, and the third global producer of this protein. Therefore, it is important that every producer has and maintains a continuous biosecurity program, strictly respecting each stage or management practice in order to obtain the economic success of their production. Supported by preventive veterinary medicine, a biosecurity program must present aspects directed to each protection system in particular, to prevent and control the presence and/or introduction of pathogenic microorganisms in herds. The objective of this work is to present an updated review of the literature on biosecurity programs to prevent the proliferation of pathogenic agents in poultry farming, such as the two types of Salmonella that pose risks to public and animal health. The research is qualitative, bibliographical-documentary exploratory, with research on sites such as Google Scholar, Unipar's veterinary magazine, SCIELO, CAPES portal and government sites. The result of the research presented a real panorama on the use of biosecurity programs in Brazil, directed to poultry production, demonstrating that producers are becoming aware of the importance of these programs, due to the pressure of the global export market. It is concluded that there is still a lack of greater awareness on the part of all Brazilian producers, to prevent the produced herd from being contaminated by pathogenic agents, mainly Salmonella, preventing public and animal health from being compromised. Only in this way will Brazil be able to maintain and further expand the poultry market at a global level.(AU)

La avicultura llevó a Brasil a ser el principal exportador de carne de pollo, desde 2011, y el tercer productor mundial de esta proteína. Por ello, es importante que todo productor cuente y mantenga un programa de bioseguridad continuo, respetando estrictamente cada etapa o práctica de manejo para obtener el éxito económico de su producción. Apoyado en la medicina veterinaria preventiva, un programa de bioseguridad debe presentar aspectos dirigidos a cada sistema de protección en particular, para prevenir y controlar la presencia y/o introducción de microorganismos patógenos en los rebaños. El objetivo de este trabajo es presentar una revisión actualizada de la literatura sobre programas de bioseguridad para prevenir la proliferación de agentes patógenos en la avicultura, como los dos tipos de Salmonella que presentan riesgos para la salud pública y animal. La investigación es cualitativa, bibliográfico-documental exploratoria, con pesquisa en sitios como Google Scholar, revista veterinaria de la Unipar, SCIELO, portal de la CAPES y sitios gubernamentales. El resultado de la investigación presentó un panorama real sobre el uso de programas de bioseguridad en Brasil, dirigidos a la producción avícola, demostrando que los productores están tomando conciencia de la importancia de estos programas, debido a la presión del mercado mundial de exportación. Se concluye que aún falta una mayor conciencia por parte de todos los productores brasileños, para evitar que el hato producido sea contaminado por agentes patógenos, principalmente Salmonella, evitando que se comprometa la salud pública y animal. Solo así Brasil podrá mantener y expandir aún más el mercado avícola a nivel mundial.(AU)

Nest refuse of Acromyrmex balzani (Hymenoptera: Formicidae) increases the plant vigor in Turnera subulata (Turneraceae) / O substrato de descarte de Acromyrmex balzani (Hymenoptera: Formicidae) aumenta o vigor da planta Turnera subulata (Turneraceae)

Abstract Some studies report the positive effect of organic residues from ant nests on soil properties and on the structure of the adjacent plant community in field experiments, but there is a gap about the effect on individual species. The purpose of the present study was to compare the soil nutrient content and the development of Turnera subulata Smith, an ornamental species, in the presence of the nest refuse (basically composed of fragments of grass leaves and the symbiotic fungus) produced by the leaf-cutting ant Acromyrmex balzani (Emery, 1890) or in control soil through a greenhouse pot experiment. The experiment was carried out with two treatments: control soil and soil with 25% of nest refuse. The plants were kept in 1L pots for 90 days. We evaluated the parameters: plant height, stem diameter, root length, number of leaves, dry weight of the root, dry and fresh aboveground biomass. Additionally, the relative chlorophyll content and leaf nutrients were used as nutritional parameters. As a result, plants that grew in the soil with nest refuse showed significant higher values of all parameters evaluated when compared to the control treatment (p < 0.001). We conclude that this biofertilizer contributed to the production of more vigorous plants, being able to act on the local dynamics of nutrients in the ecosystems where A. balzani occurs. As it is relatively abundant and easy to collect, the refuse of A. balzani has the potential to be used as an alternative substrate in the production of shortlife cycle plants.

Resumo Alguns estudos relatam o efeito positivo de resíduos orgânicos de formigueiros nas propriedades do solo e na estrutura da comunidade de plantas adjacentes em experimentos de campo, mas há uma lacuna sobre o efeito em espécies individuais. O objetivo do presente estudo foi comparar o desenvolvimento de Turnera subulata Smith, uma espécie ornamental, na presença do substrato de descarte (SD) de formigueiros produzido pela formiga cortadeira Acromyrmex balzani (Emery, 1890) por meio de experimento em casa de vegetação. O experimento foi conduzido com dois tratamentos: solo controle e solo com 25% de SD. As plantas foram mantidas em vasos de 1L por 90 dias. Foram avaliados os parâmetros: altura da planta, diâmetro do caule, comprimento da raiz, número de folhas, massa seca da raiz, biomassa seca e fresca da parte aérea. Além disso, o conteúdo relativo de clorofila e os nutrientes foliares foram usados como parâmetros fisiológicos. Como resultado, as plantas que cresceram no solo com SD apresentaram valores significativamente maiores de todos os parâmetros avaliados quando comparadas ao tratamento controle (p < 0.001). Concluímos que esse biofertilizante contribuiu para a produção de plantas mais vigorosas, podendo atuar na dinâmica local de nutrientes nos ecossistemas onde A. balzani ocorre. Além disso, por ser relativamente abundante e fácil de coletar, o SD de A. balzani tem potencial para ser utilizado como biofertilizante na produção de plantas de ciclo de vida curta.

DNA barcoding in herbal medicine:Retrospective and prospective / 药物分析学报

DNA barcoding has been widely used for herb identification in recent decades,enabling safety and innovation in the field of herbal medicine.In this article,we summarize recent progress in DNA bar-coding for herbal medicine to provide ideas for the further development and application of this tech-nology.Most importantly,the standard DNA barcode has been extended in two ways.First,while conventional DNA barcodes have been widely promoted for their versatility in the identification of fresh or well-preserved samples,super-barcodes based on plastid genomes have rapidly developed and have shown advantages in species identification at low taxonomic levels.Second,mini-barcodes are attractive because they perform better in cases of degraded DNA from herbal materials.In addition,some mo-lecular techniques,such as high-throughput sequencing and isothermal amplification,are combined with DNA barcodes for species identification,which has expanded the applications of herb identification based on DNA barcoding and brought about the post-DNA-barcoding era.Furthermore,standard and high-species coverage DNA barcode reference libraries have been constructed to provide reference se-quences for species identification,which increases the accuracy and credibility of species discrimination based on DNA barcodes.In summary,DNA barcoding should play a key role in the quality control of traditional herbal medicine and in the international herb trade.

Pretreatment Effects of Cutting Balloon on Coronary Artery Calcification Based on Finite Element Analysis / 医用生物力学

Objective To investigates the applicability of cutting balloon in the pretreatment of superficial coronary artery calcified lesions, so as to decrease the occurrence of serious consequences in the treatment of calcified lesions. Methods The effect of cutting balloon on calcified plaques with different curvatures, thickness, and length was analyzed using the finite element method, with normal balloon as a control. The thickness of calcified plaque was set to 0.3 mm and 0.4 mm, and the length was set to 2 mm and 4 mm. The calcification degree was set to 120°, 180°, 270°and 360° according to the intravenous ultrasound (IVUS) calcification severity grading, with a total of 16 types of calcified plaques. The brittle fracture module was used to simulate calcification fracture of calcified plaques, and virtual stent implantation was carried out based on pretreatment simulation. The effect of pretreatment was evaluated by calcification fracture condition and stent roundness. Results For superficial calcification lesions, in lesions less than 120°, the balloon could not remove the calcification plaque obstruction, and the stent roundness rate was 82.75%. In 180° calcified lesions with thickness of less than 0.3 mm, the calcification was broken by cutting balloon under 1 215.9 kPa expansion pressure, and the post-stent roundness rate was 74.42%; normal balloon could not cause calcification fracture under safe expansion pressure (1 418.55 kPa). In 270°calcified lesions with thickness less than 0.3 mm, the normal balloon produced 3 fractures under 1 013.25 kPa expansion pressure. The cutting balloon produced 2 fractures under 1 013.25 kPa expansion pressure, and the balloon could not fracture the circular calcified lesions with thickness of 0.3 mm. Conclusions Cutting balloon is recommended for 180°calcified lesions with thickness less than 0.3 mm, the normal balloon is recommended for 270°calcified lesions, and balloon pretreatment is not recommended for annular lesions with thickness greater than 0.3 mm.

Nest refuse of Acromyrmex balzani (Hymenoptera: Formicidae) increases the plant vigor in Turnera subulata (Turneraceae) / O substrato de descarte de Acromyrmex balzani (Hymenoptera: Formicidae) aumenta o vigor da planta Turnera subulata (Turneraceae)

Some studies report the positive effect of organic residues from ant nests on soil properties and on the structure of the adjacent plant community in field experiments, but there is a gap about the effect on individual species. The purpose of the present study was to compare the soil nutrient content and the development of Turnera subulata Smith, an ornamental species, in the presence of the nest refuse (basically composed of fragments of grass leaves and the symbiotic fungus) produced by the leaf-cutting ant Acromyrmex balzani (Emery, 1890) or in control soil through a greenhouse pot experiment. The experiment was carried out with two treatments: control soil and soil with 25% of nest refuse. The plants were kept in 1L pots for 90 days. We evaluated the parameters: plant height, stem diameter, root length, number of leaves, dry weight of the root, dry and fresh aboveground biomass. Additionally, the relative chlorophyll content and leaf nutrients were used as nutritional parameters. As a result, plants that grew in the soil with nest refuse showed significant higher values of all parameters evaluated when compared to the control treatment (p < 0.001). We conclude that this biofertilizer contributed to the production of more vigorous plants, being able to act on the local dynamics of nutrients in the ecosystems where A. balzani occurs. As it is relatively abundant and easy to collect, the refuse of A. balzani has the potential to be used as an alternative substrate in the production of shortlife cycle plants.

Alguns estudos relatam o efeito positivo de resíduos orgânicos de formigueiros nas propriedades do solo e na estrutura da comunidade de plantas adjacentes em experimentos de campo, mas há uma lacuna sobre o efeito em espécies individuais. O objetivo do presente estudo foi comparar o desenvolvimento de Turnera subulata Smith, uma espécie ornamental, na presença do substrato de descarte (SD) de formigueiros produzido pela formiga cortadeira Acromyrmex balzani (Emery, 1890) por meio de experimento em casa de vegetação. O experimento foi conduzido com dois tratamentos: solo controle e solo com 25% de SD. As plantas foram mantidas em vasos de 1L por 90 dias. Foram avaliados os parâmetros: altura da planta, diâmetro do caule, comprimento da raiz, número de folhas, massa seca da raiz, biomassa seca e fresca da parte aérea. Além disso, o conteúdo relativo de clorofila e os nutrientes foliares foram usados como parâmetros fisiológicos. Como resultado, as plantas que cresceram no solo com SD apresentaram valores significativamente maiores de todos os parâmetros avaliados quando comparadas ao tratamento controle (p < 0.001). Concluímos que esse biofertilizante contribuiu para a produção de plantas mais vigorosas, podendo atuar na dinâmica local de nutrientes nos ecossistemas onde A. balzani ocorre. Além disso, por ser relativamente abundante e fácil de coletar, o SD de A. balzani tem potencial para ser utilizado como biofertilizante na produção de plantas de ciclo de vida curta.

Nest refuse of Acromyrmex balzani (Hymenoptera: Formicidae) increases the plant vigor in Turnera subulata (Turneraceae)

Abstract Some studies report the positive effect of organic residues from ant nests on soil properties and on the structure of the adjacent plant community in field experiments, but there is a gap about the effect on individual species. The purpose of the present study was to compare the soil nutrient content and the development of Turnera subulata Smith, an ornamental species, in the presence of the nest refuse (basically composed of fragments of grass leaves and the symbiotic fungus) produced by the leaf-cutting ant Acromyrmex balzani (Emery, 1890) or in control soil through a greenhouse pot experiment. The experiment was carried out with two treatments: control soil and soil with 25% of nest refuse. The plants were kept in 1L pots for 90 days. We evaluated the parameters: plant height, stem diameter, root length, number of leaves, dry weight of the root, dry and fresh aboveground biomass. Additionally, the relative chlorophyll content and leaf nutrients were used as nutritional parameters. As a result, plants that grew in the soil with nest refuse showed significant higher values of all parameters evaluated when compared to the control treatment (p 0.001). We conclude that this biofertilizer contributed to the production of more vigorous plants, being able to act on the local dynamics of nutrients in the ecosystems where A. balzani occurs. As it is relatively abundant and easy to collect, the refuse of A. balzani has the potential to be used as an alternative substrate in the production of shortlife cycle plants.

Resumo Alguns estudos relatam o efeito positivo de resíduos orgânicos de formigueiros nas propriedades do solo e na estrutura da comunidade de plantas adjacentes em experimentos de campo, mas há uma lacuna sobre o efeito em espécies individuais. O objetivo do presente estudo foi comparar o desenvolvimento de Turnera subulata Smith, uma espécie ornamental, na presença do substrato de descarte (SD) de formigueiros produzido pela formiga cortadeira Acromyrmex balzani (Emery, 1890) por meio de experimento em casa de vegetação. O experimento foi conduzido com dois tratamentos: solo controle e solo com 25% de SD. As plantas foram mantidas em vasos de 1L por 90 dias. Foram avaliados os parâmetros: altura da planta, diâmetro do caule, comprimento da raiz, número de folhas, massa seca da raiz, biomassa seca e fresca da parte aérea. Além disso, o conteúdo relativo de clorofila e os nutrientes foliares foram usados como parâmetros fisiológicos. Como resultado, as plantas que cresceram no solo com SD apresentaram valores significativamente maiores de todos os parâmetros avaliados quando comparadas ao tratamento controle (p 0.001). Concluímos que esse biofertilizante contribuiu para a produção de plantas mais vigorosas, podendo atuar na dinâmica local de nutrientes nos ecossistemas onde A. balzani ocorre. Além disso, por ser relativamente abundante e fácil de coletar, o SD de A. balzani tem potencial para ser utilizado como biofertilizante na produção de plantas de ciclo de vida curta.

Evaluation of the application of self-made lithotomy heating mask in radical resection of rectal cancer / 中国实用护理杂志

Objective:To evaluate the effect of self-made lithotomy heating mask on intraoperative and postoperative body temperature and short-term postoperative outcome indicators in patients undergoing radical resection of rectal cancer.Methods:Using the method of quasi experimental research design, 100 patients with open rectal cancer in Ningbo Huamei Hospital of the University of Chinese Academy of Sciences from February to July 2021 were selected as the research objects. The patients were divided into experimental group and control group with 50 cases in each group. The control group was kept warm by routine methods, and the experimental group was kept warm by self-made lithotomy heating hood. The changes of core temperature at different time points before, during and after operation were compared between the two groups. The incidence of accidental hypothermia and shivering, the recovery time of anesthesia, and the incidence of various complications within 48 hours after operation were compared between the two groups after operation from the beginning of the operation to 6 hours after returning to the ward.Results:From 30 minutes after anesthesia to 3 hours after entering the ward, the core temperatures of the experimental group at 10 time points were higher than that of the control group, and the differences were statistically significant ( t values were 3.48-37.30, all P<0.01). From the beginning of surgery to 6 h after returning to the ward, the incidence of perioperative accidental hypothermia in the experimental group was 2% (1/50), lower than 24% (12/50) in the control group, and the difference was statistically significant ( χ2=11.06, P<0.05) . The number of cases of shivering in the experimental group was 10, lower than that in the control group of 22, the difference was statistically significant ( χ2=6.62, P<0.05) . The recovery time, extubation time and stay time in anesthesia recovery room of the experimental group were (8.44 ± 2.83), (13.05 ± 4.72), (74.51 ± 11.82) min, which were shorter than those of the control group (15.35 ± 2.09), (17.62 ± 3.28), (89.14 ± 9.19) min, and the difference was statistically significant ( t=-13.89, -5.62, -6.91, all P<0.01). The number of cases of agitation, delirium and nausea and vomiting in the experimental group was 3, 1 and 2 respectively, which was lower than 13, 7 and 8 in the control group, and the difference were statistically significant ( χ2=7.44, 4.89, 4.00, all P<0.05). There was no significant difference in the incidence of adverse cardiac events between the two groups ( P>0.05). Conclusions:The application of self-made lithotomy heating mask in open rectal cancer surgery can effectively improve the risk of hypothermia at different time points during and after surgery, reduce the incidence of shivering, restlessness, postoperative nausea, vomiting and delirium, shorten the time of awakening and extubation, and prevent postoperative complications. It has practical value in clinic.

Efficacy analysis of jejunal side anastomosis combined with jejunal nutrition tube in gastric cancer surgery / 中国综合临床

Objective:To investigate the adverse reactions and postoperative inflammatory reactions of Bill-Roth Ⅱ (BⅡ) gastroenterostomy with jejunal anastomosis and jejunal nutrient tube placement using linear cutting and closing device in gastric cancer surgery.Methods:A retrospective case-control study was conducted on 93 patients undergoing gastric cancer surgery in The Affiliated Hospital of North China University of Science and Technology from February 2017 to April 2020. According to 2016 (American Joint Committee on Cancer/Universal Integrated Circuit Card) AJCC/UICC, (Tumor, Node, stage; Tumor lymph node metastasis; Distant metastasis) TNM, there were 11 cases in stage ⅠA, 14 cases in stage ⅠB, 13 cases in stage ⅡA, 15 cases in stage ⅡB, 11 cases in stage ⅢA, 13 cases in stage ⅢB, and 16 cases in stage ⅢC. There were 51 cases of gastric antrum carcinoma, 26 cases of gastric body carcinoma and 16 cases of gastric pylorus carcinoma. There were 27 cases of papillary adenocarcinoma, 26 cases of tubular adenocarcinoma, 22 cases of mucinous adenocarcinoma, 9 cases of signet-ring cell carcinoma, 7 cases of adenosquamous carcinoma, and 2 cases of squamous carcinoma. The patients were divided into experimental group (48 cases) and control group (45 cases) according to whether or not the linear cutting and closing device was added and jejunal anastomosis was performed and jejunal nutrition tube was placed. The gender composition, age, lesion site, pathological type, pathological stage, postoperative hospital stay and postoperative complications were compared between the two groups, and the white blood cell count WBC, C-reactive protein CRP on the 7th day after surgery, erythrocyte Sedimentation rate (ESR), tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) inflammation indicators were compared between the two groups.Results:There was no significant difference in gender composition, age, lesion location, pathological type and pathological stage between the two groups (all P>0.05). The incidence of abdominal pain, abdominal distension, nausea, vomiting and pleural effusion in 93 patients were 18.3%(17/93), 21.5%(20/93), 23.7%(22/93), 17.2%(16/93) and 18.3%(17/93), respectively. The complication rates of the above indexes in the two groups were 10.4% (5/48) Compared with 26.7% (12/45), 12.5% (6/48) and 31.1% (14/45), 15.6%(7/48) and 33.3% (15/45), 8.3%(4/48) and 26.7% (12/45), 8.3% (4/48) and 28.9% (13/45) (χ 2 values were 4.11, 4.77, 4.52, 4.27 and 5.27, respectively; P values were 0.043, 0.029, 0.033, 0.039 and 0.022, respectively). There was no significant difference in lower extremity venous thrombosis, anastomotic bleeding, accumulated pneumonia and incision dehiscence between the two groups ( P>0.05). WBC on the 7th day after operation in the experimental group and the control group (7.02±1.83)×10 9/L and (8.39±2.27)×10 9/L ( t=3.22, P=0.002), TNF-α (2.44±0.70) μg/L and (3.56±1.14) μg/L ( t=5.71, P<0.001), IL-6 (235.31±41.72) μg/L and (365.91±73.16) μg/L ( t=10.66, P<0.001) there was significant difference between the two groups. There was no significant difference in CRP and ESR between the two groups on the 7th day after operation ( P>0.05). The postoperative hospital stay between the experimental group and the control group was (13.88±2.81) d and (22.78±2.51) d, the difference was statistically significant ( t=16.07, P<0.001). Conclusion:The application of side-to-side jejunostomy combined with jejunal nutrition tube for enteral nutrition in gastric cancer surgery can reduce the occurrence of adverse reactions such as postoperative abdominal pain, abdominal distension, accumulated pneumonia, nausea, vomiting and pleural effusion, reduce the postoperative hospital stay and reduce the postoperative inflammatory reaction to a certain extent.

Central corneal cutting error with small incision lenticule extraction surgery in different refractive degrees of myopia / 国际眼科杂志(Guoji Yanke Zazhi)

@#AIM: To study the cutting error of central corneal thickness(CCT)after small incision lenticule extraction(SMILE)in patients with different degrees of myopia. <p>METHODS: Myopic patients who had undergone SMILE surgery from May 2020 to September 2020 at the Jiangsu Province Hospital were included in the study. Data were organized by refractive status into low, moderate, and high myopia groups. The CCT was measured by the Pentacam anterior segment analysis system preoperatively and postoperatively at 1 and 3mo. Among different myopia groups, the cutting error(ΔCCT, defined as the difference between actual CCT and the predicted CCT)was calculated simultaneously during each visit. The difference ratio of ΔCCT and the relationship between ΔCCT, CCT, and cutting diameter were analyzed. <p>RESULTS: There were 221 patients(432 eyes)included in our study. At 3mo after operation, the ΔCCT in the high myopia group was larger than the low and moderate myopia group(χ²=225.74, 62.55; all <i>P</i><0.01), and the moderate myopia group was larger than the low myopia group(χ²=132.77, <i>P</i><0.01). The cutting deviation rate was also significantly different among three groups at 1 and 3mo after surgery. Pearson correlation analysis found that there was a linear regression relationship among preoperative refractive power, optical zone diameter and the central corneal cutting error at 3mo after operation(<i>r</i>=0.699, <i>P</i><0.001; <i>r</i>=0.572, <i>P</i><0.001). <p>CONCLUSION: The ΔCCT after SMILE increased with the increased of myopia, and the cutting error was positively correlated with preoperative equivalent spherical power and optical zone diameter.

Rescue and vegetative propagation of Eremanthus erythropappus (DC. ) Ma ish in natural stand / Resgate e propagação vegetativa de Eremanthus erythropappus (DC. ) MacLeish em povoamentos naturais

Abstract The native stands of 'candeia' (Eremanthus erythropappus) have been explored through management plans due to the economic potential of essential oil. The rescue of adult trees, as well as the application of silvicultural techniques that favor the restoration of the stand, can contribute to the genetic conservation of this species. This study's objective was to assess the efficiency of propagation techniques for the rescue of 26 matrices of 'candeia' in a natural managed stand and discussion about the rhizogenesis. In August 2017, trees were induced to regrowth by coppice, followed by exposure and scarification of roots. The emergence of shoots and morphology were evaluated according to the origin (i.e., stump or root). After that period, 19 matrices had their sprouts collected for the preparation of apical cuttings. Indole-3-butyric acid (IBA) was applied at the base of the cuttings. Cutting survival at greenhouse exit (GE), rooting at shade house exit (SHE), morphology and root anatomy were evaluated. In 189 days, the scarification of roots promoted 76.92% of budding. The percentage of sprouted matrices, number of shoots per matrice, length, diameter, and shoot length/diameter ratio increased over time. Only 12.2% of the cuttings survived in GE, and of these, 7.9% rooted in SHE. The cutting resulted in the formation of a clonal mini-garden of 'candeia', with seven of the 19 matrices submitted to propagation. The anatomical analyses showed that bud formation occurs from cell redifferentiation in the phloem parenchyma, and presence of crystals on the walls of the vessel elements of the secondary xylem. The shoots induction from scarification of roots could be used as a silvicultural practice for the reestablishment of the native fragments handle.

Resumo Os povoamentos nativos de candeia (Eremanthus erythropappus) vêm sendo explorados por planos de manejo devido ao potencial econômico do óleo essencial. O resgate de árvores adultas, bem como a aplicação de técnicas silviculturais que favoreçam o restabelecimento do povoamento podem contribuir para a conservação genética dessa espécie. O objetivo desse trabalho foi avaliar a eficiência de técnicas de propagação para o resgate de 26 matrizes de candeia em um povoamento natural manejado e discutir sobre a rizogênese. Em agosto de 2017, as árvores foram induzidas à rebrota por meio da decepa, seguida da exposição e escarificação das raízes. A emissão brotações e morfologia foram avaliadas de acordo com a origem (toco ou raiz). Após esse período, 19 matrizes tiveram as brotações recolhidas para o preparo de estacas apicais, que foram tratadas com ácido indolbutírico (AIB). A sobrevivência das estacas na saída da casa de vegetação (SCV), o enraizamento na saída da casa de sombra (SCS), a morfologia e a anatomia da raiz foram avaliados. Aos 189 dias, a escarificação das raízes resultou em 76,92% de emissão de brotos. O percentual de matrizes brotadas, número de brotos por matriz, comprimento, diâmetro e relação comprimento/diâmetro dos brotos aumentaram ao longo do período avaliado. Somente 12,2% das estacas sobreviveram na SCV e 7,9% enraizaram na SCS. A estaquia resultou na formação de um minijardim clonal de candeia com sete das dezenove matrizes submetidas à propagação. As análises anatômicas mostraram a diferenciação das células na região do parênquima floemático e a presença de cristais de inulina nas paredes dos elementos de vaso do xilema secundário. A indução de brotos radiculares pode ser usada como prática silvicultural visando o restabelecimento de fragmentos nativos manejados.

Nuevos factores de riesgo de hemorragia pulmonar que complican la biopsia pulmonar guiada por TC en técnica coaxial / Novel risk factors of pulmonary hemorrhage complicating CT-guided lung biopsy in coaxial technique

Objetivos: Evaluar la frecuencia y gravedad de la hemorragia parenquimatosa pulmonar tras la biopsia pulmonar con aguja transtorácica coaxial, según factores de procedimiento, aún no descritos en la literatura. El objetivo de este estudio fue determinar si la elección de la tecnología de biopsia coaxial, el posicionamiento del paciente y la dignidad de la lesión son tres nuevas variables que influyen en el riesgo de hemorragia parenquimatosa tras biopsias coaxiales de pulmón. Métodos: Se revisaron retrospectivamente los registros de 117 pacientes que se sometieron a biopsias con aguja transtorácica del pulmón entre enero de 2018 y abril de 2020. El resultado primario fue la hemorragia pulmonar. Se ha utilizado un sistema de clasificación para clasificar la hemorragia parenquimatosa pulmonar: Grado 0 - Grado 3. Se evaluaron tres variables novedosas relacionadas con el paciente, la técnica y la lesión como predictores de hemorragia pulmonar: tecnología de biopsia coaxial, posición del paciente y dignidad de la lesión. Resultados: De los 117 pacientes, 18 (15,4%) pacientes con tecnología de biopsia coaxial de corte, versus 29 (24,8%) pacientes con tecnología coaxial de núcleo completo mostraron hemorragia significativa en las exploraciones de control posteriores a la biopsia. (IC del 95% 0,06-0,33, p <0,0001). No hubo diferencias significativas en la hemorragia pulmonar entre el diagnóstico histológico benigno y maligno (IC 95% 0,84-4,44, p = 0,1199) y la posición del paciente en decúbito prono o supino (IC 95%: 0,57-2,57, p = 0,6232). Conclusiones: La incidencia y gravedad de la hemorragia pulmonar depende de la tecnología de biopsia coaxial utilizada; siendo mayor en pacientes sometidos a una biopsia con tecnología full-core y menor después del uso de tecnología de corte. En este estudio de pronóstico no se estableció una correlación significativa entre la hemorragia pulmonar parenquimatosa y la posición del paciente o la dignidad de la lesión

Objectives: To evaluate the frequency and severity of pulmonary parenchymal hemorrhage after coaxial transthoracic needle biopsy of the lung, according to procedural factors, not yet described in literature. The aim of this study was to determine whether the choice of the coaxial biopsy technology, patient positioning and the lesion dignity are three new variables influencing the risk of parenchymal hemorrhage after coaxial biopsies of the lung. Methods: Records from 117 patients who underwent transthoracic needle biopsies of the lung between January 2018 and April 2020 have been retrospectively reviewed. The primary outcome was pulmonary hemorrhage. A grading system has been used to classify pulmonary parenchymal hemorrhage: Grade 0 ­ Grade 3. Three novel patient, technique and lesion-related variables were evaluated as predictors of pulmonary hemorrhage: coaxial biopsy technology, patient positioning and lesion dignity. Results: Out of the 117 patients, 18 (15,4%) patients with cutting coaxial biopsy technology, versus 29 (24,8%) patients with full core coaxial technology showed significant hemorrhage on the post-biopsy control scans. (95% CI 0,06-0,33, p<0,0001). No significant difference in pulmonary hemorrhage between benign and malignant histological diagnosis (95% CI 0,84-4,44, p=0,1199) and prone or supine patient positioning (95% CI: 0,57-2,57, p= 0,6232) was found. Conclusions: The incidence and severity of pulmonary hemorrhage depends on the coaxial biopsy technology used; being higher in patients undergoing a biopsy with full-core technology and lower after the use of cutting technology. No significant correlation between parenchymal pulmonary hemorrhage and patient positioning or lesion dignity was established in this prognostic study.

Incidencia de distintas frecuencias de corte en parámetros nutritivos de pasturas de alfalfa (Medicago sativa L.) de distinto grado de reposo invernal / Incidence of cutoff frequency in nutritional parameters of alfalfa (Medicago sativa L.) of different degrees of winter rest

Resumen El objetivo de este trabajo fue evaluar la calidad nutricional en 3 cultivares de alfalfa, pertenecientes a diferentes grupos de reposo invernal (GRI), sometidos a dos frecuencias de corte, durante un año del cultivo, fundamentado en que es abundante la información existente en estudios realizados en productividad, cobertura y persistencia, no así en la determinación de calidad de forraje sometidos a diferentes frecuencias de cortes y de GRI contrastantes. Se utilizaron tres cultivares (GR6-Verzy), (GR9-Mecha) y (GR10-Ruano). El diseño experimental fue de parcelas divididas con cuatro repeticiones. Se establecieron 2 tratamientos definidos por los intervalos entre cortes: T1: 25 días y T2: 35 días. Estos fueron precisados para las estaciones de primavera, verano y otoño. En invierno el intervalo fue de 45 y 55 días en T1 y T2, respectivamente. Las variables evaluadas fueron: porcentaje de materia seca (% MS), porcentaje de proteína bruta (% PB), porcentaje de fibra detergente neutro (% FDN) y porcentaje de fibra detergente ácido (% FDA). Se encontraron diferencias significativas para todas las variables nutricionales estudiadas, para ambos tratamientos. Se observó interacción entre cultivares y tratamiento para % PB. Los cultivares estudiados con diferentes GRI, no expresaron diferencias significativas en los parámetros de calidad evaluados para ninguna de las frecuencias de corte realizadas. La frecuencia de corte de 35 días arrojó los menores % PB y mayores % FDN y % FDA, por lo cual el forraje resulta para esta frecuencia de menor calidad, llevando a la disminución de la digestibilidad y aprovechamiento de la pastura para el ganado.

Abstract The objective of this work was to evaluate the nutritional quality in 3 cultivars of alfalfa, belonging to different winter dormancy (GRI), subjected to two cutting frequencies during one year of cultivation, based on the abundant information existing in studies carried out in productivity, coverage and persistence, not so in the determination of quality of forage subjected to different frequencies of cuts and contrasting GRI. Three cultivars (GR6-Verzy), (GR9-Mecha) and (GR10-Ruano) were tested. The experimental design was a complete split plot with four repetitions. Two treatments defined by the cutting intervals were established: T1: 25 days and T2: 35 days. These were specified for spring, summer and fall seasons. For winter the interval was 45 and 55 days in T1 and T2, respectively. The evaluated variables were: percentage of dry matter (% DM), percentage of crude protein (% PB), percentage of neutral detergent fiber (% FDN) and percentage of acid detergent fiber (% FDA). Significant differences were found for all the nutritional variables studied, for both treatment with p <0.05 with InfoStat program. Interaction between cultivars and treatment was observed for % PB. The 35 days cutoff frequency of yielded the lowest percentages of PB and the highest percentages of FDN and FDA. Hence the forage resulting from this frequency is of a lower quality, leading to decreased digestibility and lower performance of pasture for livestock.

Vegetative rescue of Cedrela fissilis Vell. by the rooting of cuttings from epicormic and canopy sprouts / Resgate vegetativo de Cedrela fissilis Vell. por enraizamento de estacas de brotos epicórmicos e de copa

ABSTRACT: Cedrela fissilis is a species of great genetic diversity, with low population density and seminal propagation, which causes difficulties in the vegetative propagation process. This research evaluated the vegetative rescue and propagation of stem cutting rooting originated from epicormic and canopy sprouts of C. fissilis. For this, the induction of epicormic sprouts was evaluated 52 days after the complete girdling and semi-girdling 20 and 40 cm from the ground, and no girdling treatment, during spring (2018), summer (2018) and autumn (2019). The variables evaluated were, survival (%), sprouting (%), number, length (cm) and diameter (mm) of sprouts. The cuttings were made from spring epicormic sprouts, divided in two categories: 10 cm cuttings placed vertically in pits and 5 cm cuttings placed horizontally in furrows. The canopy sprouts were collected in the summer, then cut in apical and intermediate cuttings (15 cm). After 60 days, the cuttings were evaluated in survival (%), rooting (%), callus (%), average number and length of roots (cm). Results showed that only the complete girdling produced sprouts (average >67%) with no difference between 20 and 40 cm heights, with a greater number of sprouts during spring. The cuttings from epicormic sprouts, planted vertically in pits presented higher percentage of rooting (44%) than cuttings planted horizontally in furrows (17%). Cuttings from the canopy had inconsiderable rooting (apical - 2%; intermediate - 0%). The girdling periods influences the number of epicormic sprouts and its use for cutting was more efficient in rooting.

RESUMO: Cedrela fissilis é uma espécie de grande diversidade genética, com baixa densidade populacional florestal, de propagação seminal, que apresenta dificuldade de ser propagada vegetativamente. O objetivo deste trabalho foi avaliar o regate e propagação vegetativa a partir do enraizamento de estacas de origem epicórmicas e de copa de C. fissilis. Para isso, a brotação epicórmica foi avaliada 52 dias após o anelamento completo e semianelamento nas alturas de 20 e 40 cm, e tratamento sem anelamento, durante primavera (2018), verão (2018) e outono (2019). Foram avaliados: sobrevivência das árvores (%), brotação (%), número, comprimento (cm) e diâmetro (mm) de brotos. A estaquia utilizou brotos epicórmicos de primavera, divididos em duas categorias: estacas com 10 cm colocadas verticalmente em covas e estacas de 5 cm colocadas horizontalmente em sulcos. Brotos de copa foram coletados no verão, cortados em estacas apicais e intermediárias (15 cm). Após 60 dias avaliou-se das estacas: sobrevivência (%), enraizamento (%), calos (%), número médio e comprimento de raízes (cm). Os resultados apresentam que apenas o anelamento completo formou brotos (média >67%), sem diferença entre a altura 20 e 40 cm, com maior número de brotos durante a primavera. As estacas de brotos epicórmicos, plantadas verticalmente em covas, apresentaram a maior porcentagem de enraizamento (44%) que estacas plantadas horizontalmente em sulcos (17%). Estacas de copa obtiveram enraizamento desconsiderável (apicais - 2%; intermediárias - 0%). As épocas de anelamento influenciam no número de brotos epicórmicos e seu uso como estacas foi mais eficiente no enraizamento.

A 3D model to illustrate the nest architecture of Acromyrmex balzani (Hymenoptera; Formicidae)

ABSTRACT For eusocial insects, the nest is a place where the main social interactions occur. The nest architecture ensures protection from predators and the environment, as well as suitable conditions for brood rearing, food storage, and in some cases the cultivation of fungus farms. Variations in nest architecture can occur, according to the environmental conditions. In order to elucidate the internal organization of nests, most studies use 2D schemes and photographs to illustrate the nest architecture models. However, 3D models can provide a different and more realistic view of the nest architecture. The aim of this study was to describe the nest architecture and colony size of the grass-cutting ant Acromyrmex balzani (Emery), using 3D models to illustrate these features. The structures of eight colonies were measured and the data were used to create a 3D model of each nest. Externally, the nests had one or more piles of loose soil and waste, with a single straw turret over the entrance. Underground, the nests had from 2 to 6 chambers, at a maximum depth of 122 cm. It could be concluded that the observed nest architecture of Acromyrmex balzani followed, at least in part, the pattern already reported in the literature. However, this is the first report of connection between two chambers made by two shafts, as well as the presence of the turret at the nest entrance/exit, regardless of the season of the year. These differences evidence that the nest structures may vary, depending on intrinsic or local environmental conditions.

Mental symptoms and its influencing factors of patients with malignant tumor undergoing chemotherapy in general hospital / 中华行为医学与脑科学杂志

Objective:To estimate the mental symptoms in malignant tumor patients undergoing chemotherapy using DSM-5 cross cutting symptom measure.Methods:A total of 314 patients who undergoing chemotherapy in oncology department of Zhongshan Hospital, Fudan University who met all standards were chosen. The DSM-5 cross cutting symptom measure Level 1 Scale was used to assess the mental symptoms of the patients. SPSS 25.0 software was used for χ 2 test, Pearson correlation analysis and multiple regression analysis. Results:The most common symptoms in the patients were depressive symptoms(85/314, 27.1%), somatic symptoms (79/314, 25.2%), manic symptoms (78/314, 24.5% ) and anxiety symptoms (76/314, 24.3%). The proportion of anxiety symptoms in malignant tumor patients who were taken care of by other personnel(26/64, 40.6%) was significantly higher than that in patients who were taken care of by immediate relatives(50/250, 20.0%)(χ 2=12.23, P<0.05). Patients with unstable working conditions were more likely to have depressive symptoms (χ 2=7.64, P<0.05). There was a significant negative correlation between the patients' understanding of the disease and their scores of depressive symptoms, somatic symptoms, manic symptoms, anxiety symptoms and the total score of mental symptoms( r= -0.26, -0.15, -0.12, -0.25, -0.22, all P<0.05). In addition, the total score of mental symptoms of malignant tumor patients was significantly positively correlated with family burden and family status( r=0.11, 0.11, both P<0.05), and negatively correlated with patients' education ( r=-0.13, P<0.05). Multiple regression analysis showed that the degree of understanding of the disease( β=-0.203) and family status( β=0.197) were the influencing factors of mental symptoms of inpatients malignant tumors undergoing chemotherapy in general hospital ( F=13.653, P<0.001). Conclusion:Malignant tumor patients undergoing chemotherapy may have a variety of mental symptoms. The high incidence mainly includes depressive symptoms, somatic symptoms, manic symptoms and anxiety symptoms. The understanding of the patients to the disease and family situation are the main influencing factors.

Effects of 3 kinds of processing techniques on the fitness of metal clasp / 中南大学学报(医学版)

OBJECTIVES@#At present, removable partial denture is still one of the main restoration methods for dentition defects. However, the trend for digital partial denture is becoming more and more obvious in the field of oral repair. However, there are relatively few studies on digital removable partial denture. The aim of this study is to investigate the effects of 3 processing technologies (precision casting, digital cutting, and 3D printing) on the fitness for the clasps of cobalt chromium alloy and pure titanium removable partial denture, and to provide a theoretical basis for the clinical application of digital removable partial denture.@*METHODS@#Clasps of Co-Cr alloy and pure titanium were produced by 3 different processing technologies (precision casting, digital cutting, and 3D printing). There are 6 groups, including a casting pure titanium group, a casting cobalt chromium group, a cutting pure titanium group, a cutting cobalt chromium group, a printing pure titanium group, and a printing cobalt chromium group (@*RESULTS@#There was no statistical difference in fitness between the casting pure titanium group and the casting cobalt chromium group (@*CONCLUSIONS@#The cobalt chromium alloy and pure titanium clasps made by precision casting, digital cutting, and 3D printing have good fitness. Under the same process, there is no significant difference between cobalt chromium alloy and pure titanium clasps. The 3D printing pure titanium clasps have better fitness than casting pure titanium and cutting pure titanium clasps, which meet the needs of clinical application.

Finite Element Analysis on Stress State of Knee Joint with Different Lateral Cutting Angles under Expected Conditions / 医用生物力学

Objective To investigate the characteristics of knee kinematics and ground reaction force (GRF), as well as the stress state of cartilage and meniscus in the process of lateral incisions at different cutting angles under expected conditions. Methods Kinematics and GRF data of 14 subjects at 45°, 90° and 135° cutting angle respectively under expected conditions were collected. The knee joint reaction force was obtained through the inverse dynamics calculation of Visual 3D. Based on three-dimensional (3D) finite element model of the knee joint, the contact process at 3 lateral cutting angles was simulated. ResultsUnder expected conditions, there were significant differences in knee joint kinematics characteristics at 3 cutting angles during contact process(P＜0.001), and the knee flexion increased with the cutting angle increasing; the vertical GRF decreased significantly with the cutting angle increasing (P＜0.001), while the horizontal GRF showed the opposite trend; for 3 cutting angles, the peak contact stress of patellar cartilage and femoral cartilage was larger at 90° cutting angle, the peak principal stress at anterior cruciate ligament (ACL) contact point was also larger at 90° cutting angle, and the following was at 135° and 45° cutting angle, respectively; the peak contact stress of lateral femoral cartilage was larger than that of medial femoral cartilage at 3 cutting angles. Conclusions The risk of knee joint injury is higher at 90° cutting angle, and the stress state of knee joint at 135° cutting angles is better than that at 90° cutting angle, and the risk of knee joint injury does not increase with the increase of cutting angle under expected conditions.

Zinc - rooting cofactor in rubber tree mini-cuttings / Zinco - cofator de enraizamento em miniestacas de seringueira

The rubber tree (Hevea brasiliensis Müell. Arg.) is a species of significant economic interest in the natural rubber industry in Brazil and the world. This species presents recalcitrance to rooting, and its cuttings are difficult to propagate. This study aimed to evaluate the effect of the pre-conditioning of rubber tree mini-cuttings with zinc on the improvement of the adventitious rooting of rootstocks. Mini-cuttings were standardized with 45 mm length and submitted to preconditioning by immersion of the mini-cutting base in solutions containing 0.00; 0.04; 0.08; 0.16; 0.32 and 0.64 mg L-1 of Zn, for 24 hours. The experimental design was randomized blocks with six treatments and four replicates of 10 mini-cuttings. The rubber tree mini-cuttings were placed in a fitotron-type growth chamber, at 25 °C, with 12-hour photoperiod, 5,000 K intensity, and 95% of relative air humidity, for 60 days. The survival rate, number of buds, percentage of mini-cuttings that had leaf abscission, the percentage of mini-cuttings with callogenesis in the root meristem, the percentage of rooted mini-cuttings, the number of primary roots and root length were evaluated. The highest values of survival rate, the number of buds, the number of primary roots, the percentage of mini-cuttings with callogenesis in the root meristem, the percentage of rooted mini-cuttings and root length were observed with 0.16 to 0.26 Mg L-1 of Zn. The use of zinc in the mini-cuttings of rubber tree reduces linearly the percentage of mini-cuttings that had leaf abscission and the formation of callogenesis in the root meristem.

A seringueira (Hevea brasiliensis Müell. Arg.) é uma espécie de importância econômica para a indústria da borracha natural do Brasil e do mundo. Esta espécie apresenta recalcitrância ao enraizamento e suas estacas são difíceis de se propagar. Este trabalho objetivou avaliar o efeito do pré-condicionamento de miniestacas de seringueira com zinco na melhoria do enraizamento adventício de porta-enxertos. As miniestacas foram padronizadas com 45 mm de comprimento e submetidas ao pré-condicionamento por imersão da miniestaca em soluções contendo 0.00; 0,04; 0,08; 0,16; 0,32 e 0,64 mg L-1 de Zn, por 24 horas. O delineamento experimental foi em blocos ao acaso, com seis tratamentos e quatro repetições de 10 miniestacas. As miniestacas de seringueira foram colocadas em câmara de crescimento tipo fitotron, a 25 °C, com fotoperíodo de 12 horas, intensidade de 5.000 K e umidade relativa do ar de 95% por 60 dias. Foram avaliadas a taxa de sobrevivência, o número de gemas, a porcentagem de miniestacas que apresentaram abscisão foliar, o percentual de miniestacas com calogênese no meristema radicular, o percentual de miniestacas enraizadas, o número de raízes primárias e o comprimento das raízes. Os maiores valores de taxa de sobrevivência, o número de gemas, o número de raízes primárias, a porcentagem de miniestacas com calogênese no meristema radicular, o percentual de miniestacas enraizadas e o comprimento radicular foram verificados com 0,16 a 0,26 Mg L-1 de Zn. O uso de zinco nas miniestacas de seringueira reduz linearmente a porcentagem de miniestacas que tiveram abscisão foliar e a formação de calogênese no meristema radicular